ICP Series.

Maxivolt engineers designed the ICP-Series to provide sensitive individual circuit protection. The ICP Plus, ICP-CRA, and 420-RW were later introduced to expand the application and communication versatility of the line. ICP devices require a standard octal 8-pin base to install, are available in series and parallel configurations, and provide an alarm pin for device status monitoring. ICP Plus and ICP-CRA devices provide dry contacts for device status monitoring. All ICP-Series devices feature a hybrid circuit consisting of only the highest quality components engineered to provide an industry best clamping threshold for the specific voltage application they are designed for. Safety fusing and the non-ground dependent design eliminate safety risks associated with competitive devices. The various benefits of ICP-Series products provide clients with a quantifiable payback.

THE ICP-24ACS

  • Hybrid Circuit Surge Suppression
  • Safety Fusing
  • Dual Means of Indication
  • Open Air PCB Construction
  • Low Clamping Voltage
  • Low Surge Current Rating
  • RoHs Compliant

APPLICATION

Voltage

24 VAC

Configuration

2 Wire

CHARACTERISTICS

Fusing

Non Servicable

Indication

Blue Flag & Remote Alarm

Markings

Silk Screened

Enclosure

NEMA Type 1

DIAGRAM

ICP-24ACS dimensional drawing showing the enclosure, plug-in pins, and measurements in inches and millimeters.

SPECIFICATIONS

Modes of Protection

L-N

Type

n/a

Clamp Voltage

56

MCOV

35

Operating Temperature

-40° C to 85° C

Operating Humidity

1% to 95%

EMI-RFI Noise Attenuation

< 40 dB

Component Response Time

< 1 ns

Frequency Range

50 - 400 HZ

STANDARD INSTALLATION SUMMARY

Install According To Instructions Provided With DeviceICP-24ACS pin diagram: terminal 7 connects to positive, terminal 2 to negative, terminal 1 to alarm, and terminal 6 to load.

  1. Install 8 terminal octal socket (available separately) as close to the power source as possible.
  2. Connect terminal 7 to phase.
  3. Connect terminal 2 to neutral.
  4. Connect terminal 1 to alarm source.
  5. Connect terminal 6 to load.
  6. Plug ICP-24ACS into octal socket.

Note: For optimum SPD performance minimize conductor length and avoid sharp bends.
Note: For replacement, ICP-24ACS is hot-swappable.

Note: Maximum Load 72 Watts.

Maxivolt MV-100 surge protective device with a black rectangular enclosure, two red indicator lights, and wires at the top.

MV Series

Maxivolt GuardDog WRG-400 surge protective device with a black front panel and illuminated blue indicator lights.

WRG Series

Maxivolt ICP-100 Plus surge protective device with a clear protective cover beside its black labeled base.

ICP Series

Maxivolt WS-5KV surge protective device mounted inside an open square enclosure with its wiring and internal components visible.

WS Series

We'd love to hear from you

Contact Us

A team of power quality specialists can help you find a solution for your power quality issues. With vast experience and knowledge protecting industries from transient voltage, our team will help you with product selection, placement, and installation are critical to the performance of a surge protection system.

Send us a Message

Request A Quote

Prefer talking over typing? 806-371-0722

During business hours, you’ll always reach a real human. No robots. No phone trees. No “press 7 to go back to the previous menu.”