1-800-583-4773
MaxivoltProudly Handmade in the USA • Since 1988
MaxivoltMaxivoltMaxivoltMaxivolt
TESTIMONIALSFAQVIDEOCAREERSBLOG

The ICP-40DCS

  • Hybrid Circuit Surge Suppression
  • Safety Fusing
  • Dual Means of Indication
  • Open Air PCB Construction
  • Low Clamping Voltage
  • Low Surge Current Rating
  • RoHs Compliant

Application

Voltage  12 -48 VDC
Configuration 2 Wire

Characteristics

Fusing Non Serviceable
Indication Blue Flag & Remote Alarm
Markings Silk Screened
Enclosure NEMA Type 1
Environmental RoHs

Diagram

inches
[millimeters]

Specifications

Modes of Protection n/a
Type n/a
Clamp Voltage 60
MCOV 48
Operating Temperature -40° C to 85° C
Operating Humidity 1% to 95%
EMI-RFI Noise Attenuation < 40 db
Component Response Time < 1 ns
Frequency Range 50 - 400 HZ

Standard Installation Summary

Install According To Instructions Provided With Device

  1. Install 8 pin octal socket (available separately) as close to the power source as possible.
  2. Connect pin 7 to "+".
  3. Connect pin 2 to "-".
  4. Connect pin 1 to alarm source.
  5. Connect pin 6 to load.
  6. Plug ICP-40DCS into octal socket.

Note: For optimum SPD performance minimize conductor length and avoid sharp bends.
Note: For replacement, ICP is hot-swappable. 

Note: Maximum Load 3 Amps.

 

MAXIVOLT
Serious Surge Protection®
ICP Series
Made in the USA
Download Data Sheet
View Our Catalog
How to Buy

Maxivolt the
GUARDDOG®
series
the GuardDog® series
Maxivolt
Maxivolt the MV
series
the MV series
Maxivolt
Maxivolt the ICP
series
the ICP series
Maxivolt
Maxivolt the WS
series
the WS series
Maxivolt

Get in touch with Maxivolt

Fill out our brief form

Contact Name*

Company Name

Phone Number*

Email Address*

Questions & Comments*


You can also reach us by phone or email Maxivolt 1-800-583-4773 Maxivolt info@maxivolt.com